Environmental Test Chamber

Providing you the best range of clean room pass through chamber, humidity chamber, stainless steel humidity chamber, thermal shock test chamber and ss cold storage cabinet with effective & timely delivery.

Clean Room Pass Through Chamber

Product Price: Rs 4.67 Lakh / PieceGet Best Price

Product Details:

Material	Stainless Steel
Voltage	230V
Brand	Kaizen
Electronic Frequency	50 Hz
Ambient Temperature	0-30 Deg C
Preheating Temperature	60-200 Deg C
Power Source	Electric

Get Best QuoteRequest Callback

Humidity Chamber

Product Price: Rs 86,000 / UnitGet Best Price

Product Brochure

Product Details:

Usage/Application	Lab
Brand	Kaizen
Material	MS
Model Number	KALF-V2
External Dimension	910 X 1450 X 1930 mm,36" x 36" x 36"
Internal Dimensions	610 X 610 X 610 mm,24" x 24" x 24"
Airflow Velocity	270 CFM 458.7 M3/hr

Kaizen Airtech Solution being a leading manufacturer in environmental test chamber provides a controlled environment for testing products. Chamber available size from small bench top boxes to big computer controlled walk-in chamber. Humidity chamber provides a controlled environment for testing product, it can check product performance in different temperature and humidity.

Key Benefits:

Energy Efficient
Superior airflow uniformity
Easy Operation
Extremely stable and uniform Environment

Features:

Workspaces size range from 300 to 3,300 litres to accommodate many product sizes.
The interior chamber of the unit is constructed of a durable, corrosion resistant 304 stainless steel. Low watt density heaters are used that also contribute to the unit’s long life.
A unique design of thermal barrier for better energy efficiency, Machine filled PUF insulation to eliminate void pockets, puff insulation density 40kg/ meter^3
Customize chamber airflow can be factory configured from the standard horizontal flow to a vertical flow.
Kaizen Airtech designed air baffle to ensure air distributed evenly on product and the entire product is conditioned. It increases product temperature change rates and improves uniformity throughout the chamber
Precise monitoring of temperature and humidity conditions, controller work to determine whether to run in single stage or cascade mode, depending on temperature set point and cooling requirement.
Heating and cooling system ensures accurate test results for your product during environmental testing. PTC works for both heating and cooling shelves increase product loading capacity, allowing for more effective use of testing space.
A boiler achieves high volumes of moisture with consistent water vapour levels and more repeatable test results.
Electronic humidity sensor located in the chamber inside which eliminates the need for thermocouple wicks and lost tanks and maintain low humidity accuracy.
Shelves inside the chamber are easy to detach and convenient to wash, the height of each shelf can also be adjusted.
There is a layer of toughened-glass off with sealing rubber as the inner layer of the outer door for convenient observation of the in-incubator temperature.

Available Model:

Model No.	External Dimensions (mm)	Internal Dimensions (mm)	Airflow Velocity
KALF-H3	1070 X 1600 X 2080 mm (42” x 63” x 82”)	610 X 610 X 610 mm (24” x 24” x 24”)	3460 CFM 781.54 M3/hr
KALF-H4	1540 X 2050 X 2580 mm (60.55” x 81” x 101.5”)	1220X 1220 X 1220 mm (48” x 48” x 48”)	650 CFM 1104.36 M3/hr
KALF-H6	1540 X 2050 X 2580 mm (60.55” x 81” x 101.5”)	1220 X 1520 X 1220 mm (48” x 60” x 48”)	840 CFM 1427.17 M3/hr

Get Best QuoteRequest Callback

Stainless Steel Humidity Chamber

Product Price: Rs 50,000 / PieceGet Best Price

Product Details:

Brand	Kaizen
Material	Stainless Steel
Power Source	Electric
Frequency	50 Hz
Phase	3
Voltage	230V
Accuracy	+- 5 %

We are a leading manufacturer of Stainless Steel Humidity Chamber provides a controlled environment for testing products. Chamber available size form small bench top boxes with big computer controlled walk-in chamber. Humidity chamber provides a controlled environment for testing product, it can check product performance in different temperature and humidity.

Features:

Workspaces size range from 300 to 3,300 liters to accommodate many product sizes.
The interior chamber of the unit is constructed of a durable, corrosion resistant 304 stainless steel. Low watt-density heaters are used that also contribute to the unit’s long life.
Unique design of thermal barrier for better energy efficiency, Machine filled PUF insulation to eliminate void pockets, puff insulation density 40kg/m3
Customise chamber airflow can be factory configured from the standard horizontal flow to a vertical flow.
Kaizen Airtech designed air baffle to ensure air distributed evenly on product and the entire product is conditioned. It increases product temperature change rates and improves uniformity throughout the chamber
Precise monitoring of temperature and humidity conditions, controller work to determine whether to run in single stage or cascade mode, depending on temperature set point and cooling requirement.
Heating and cooling system ensures accurate test results for your product during environmental testing. PTC works for both heating and cooling
Shelves increase product loading capacity, allowing for more effective use of testing space.
A boiler achieves high volumes of moisture with consistent water vapor levels and more repeatable test results.
Electronic humidity sensor located in chamber inside which eliminates the need for thermocouple wicks and lot tanks and maintain low humidity accuracy
Shelves inside the chamber are easy to detach and convenient to wash, the height of each shelf can also be adjusted.
There is a layer of toughened-glass off with sealing rubber as the inner layer of the outer door for convenient observation of the in-incubator temperature.

Get Best QuoteRequest Callback

Thermal Shock Test Chamber

Product Price: Rs 4.67 Lakh / UnitGet Best Price

Product Brochure

Product Details:

Material	MS
Brand	Kaizen
Model No	KATHC-10
External Dimensions	1500 x 1950 x 1450 mm
Internal Dimensions	350 x 350 x 400 mm
Finish	Polished

Kaizen Airtech Solution being a leading manufacturer in Thermal shock test chamber provides a controlled environment for testing products. Chamber available size form small bench top boxes to big computer controlled walk-in chamber. Thermal Shock Testing chamber Systems are designed for compatibility with your choice of Air heating system. This provides you with the flexibility to use your existing heating chamber. The thermal testing chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low-temperature environment. that is in the shortest time to test its thermal expansion and contraction caused by the chemical change or physical harm. Each model is manufactured to standard designs, but may be custom engineered to meet a wide range of stringent test requirements. Optimal test environments require thermal chambers configured for device size, temperature range, transition speed and device access.

Key Benefits:

Energy Efficient
Superior airflow uniformity
Easy Operation
Extremely stable and uniform Environment

Features:

Work spaces size range from 300 to 3,300 litres to accommodate many product sizes
HEPA Filter with 99.999% efficiency against 0.3µm particles, 99.995% filter efficiency for MPPS at 0.1µm improves safety
The interior chamber of the unit is constructed of a durable, corrosion resistant 304 stainless steel. Low watt density heaters are used that also contribute to the unit’s longer life.
Microcomputer base temperature controller which is automatic control high low temperature cycling. Both remain and change time can be adjustable, it has various safety precautions and device with several record methods
Unique design of thermal barrier for better energy efficiency, Machine filled PUF insulation to eliminate void pockets, puff insulation density 40kg/ meter^3
Customize chamber airflow can be factory configured from the standard horizontal flow to a vertical flow.
When the harmful task condition like short-circuit, leakage; compressor with over-pressure, over-load, oil pressure, water-break, over temperature the screen will automatic display the fault cause and provide exclusion method.
Heating and cooling system ensures accurate test results for your product during environmental testing. PTC works for both heating and cooling.All equipment is fully automatic, and all process are precisely controlled with P.L.C.’S.
Thermal Shock Tester is divided into three sections: the high temperature chamber, the low temperature chamber and the testing chamber
When the input voltage is unstable, due to it has the stop device that the remove time of high-low temperature shock structure within 10s.5-minute recovery time for this product.