- Home
- ยป
- Products & Services
- »
- Clean Room Equipment
Clean Room Equipment
Fan Filter Unit
Minimum Order Quantity: 1 Unit
Product Brochure
Material | SS 304,MS powder coated |
Voltage | 430 V |
Frequency | 50 / 60 HZ |
Surface Finishing | matt finish,Mirror Finish,Glossy Finish,Powder Coated |
Brand | Kaizen |
Size | 4 x 2 or 2 x 2 ft |
Velocity | 0.45 m/s |
Airflow Speed | 800 cfm |
Efficiency | 99% |
Fan Filter Units direct a vertical laminar flow of filtered air downward through the enclosed cleanroom area.
Each includes a 1100 CFM impeller blower (rated at 90 FPM with filter load) mounted in an MS housing with a plenum design that ensures ample air velocity across the entire face of the filter. A HEPA (high efficiency particulate air) filter installed inside the housing is rated 99.99% efficient at 0.3um particles. The filtration medium consists of micro porous polyurethane mini-pleats held in place by strong, rigid plastic separators that keep the medium from nesting. This design channels airflow with optimal efficiency to reduce resistance. The filter is sealed into the sturdy powder-coated steel frame with a fire-retardant, non-outgassing adhesive. Power to the Fan Filter Units is controlled by a master ON/OFF switch located on the cleanroom control panel. All 120VAC units and 220VAC, 60Hz units are UL listed. CE-marked models are available for 220VAC, 50Hz operations.
FFU details – domensions model specification
Additional Information:
- Item Code: KAFFU
- Production Capacity: 100
- Delivery Time: STOCK
- Packaging Details: corrugated Box
Clean Room Equipment
Product Brochure
Brand | Kaizen |
Usage/Application | Industrial |
Material | SS or Powder coated |
Air Flow | 1600 |
Size | standard |
Corrosion Resistance | Yes |
Height | 2100 mm |
Operation Time | 0-2 sec |
Time Setting For Air Shower | HMI based controller set time is very essay |
Air Shower
Fan Filter Unit
Laminar Air Flow
Pass Box
Air Tent
Positive Pressure Module
Clean Room Door
Additional Information:
- Production Capacity: 200/ week
- Delivery Time: two week
- Packaging Details: corrugated box
Horizontal Laminar Air Flow
Product Brochure
Brand | Kaizen |
Model Number | KALF-H2 |
Illumination | 1 x 20 W |
External Dimensions | 705 x 870 x 1440 mm |
Internal Dimensions | 572 X 610 X 572 mm |
Airflow Velocity | 270 CFM 458.7 M3/hr |
Working Area | 2 x 2 x 2 feet |
Key Benefits:
- Class 100 Air quality maintains.
- Energy Efficient
- Superior airflow uniformity
- Ergonomic design
Features:
- Microprocessor Controller displays all safety information on one screen with a touchpad.
- Stainless steel work surface ensures optimal clean less, chemical resistance and containment of accidental liquid spills.
- Ergonomic design encourages proper posture reducing fatigue.
- Washable, reusable pre-filter which trap dust and large particle.
- 10x filtration efficiency of HEPA filter creates Class 100 air quality work zone instead of industry-standard ISO Class 5.
- The removable protective screen located in front of the HEPA filter and easily removed for service and cleaning.
- Each clean bench is individually factory tested for safety and performance in accordance with international standards.
- All components are cleanroom compatible.
- Kaizen Airtech Laminar Flow Clean Benches have been tested for cross-contamination and product protection using microbiological test method.
- Built-in recessed illuminator provides diffused lighting without interfering with the laminar flow.
- Face velocity is adjustable from less than 90 FPM (0.45 m/s) to higher than 130 FPM (0.66 m/s)
- Pressure drop from 0.35 to 0.795 inches W.G at 90 FPM (0.45 m/s)
Available Model:
Model No. | External Dimensions | Internal Dimensions | Airflow Velocity |
KALF-H3 | 1020X870X1440 mm (40.1” x 34.2” x 56.6”) | 3857X 610 X572 mm (33.7” x 24.0” x 22.5”) | 460 CFM 781.54 M3/S |
KALF-H4 | 1315X870X1440 mm (51.7” x 34.2” x 56.6”) | 1180X 610 X572 mm (46.4” x 24.0” x 22.5”) | 650 CFM 1104.36 M3/S |
KALF-H6 | 1930X870X1440 mm (75.9” x 34.2” x 56.6”) | 1790X 610 X572 mm (70.4” x 24.0” x 22.5”) | 840 CFM 1427.17 M3/S |
Laminar Airflow Cabinet
Product Brochure
Brand | Kaizen |
Voltage | 230V |
Frequency | 50 Hz |
Material Grade | SS 304 |
Noise Level | 60-65 dB |
Body Material | SS |
Key Benefits:
- Flexibility Design
- Humidity Control
- Adjustable Air Flow Velocity
- Temperature Control
- Low Vibration
Features:
- Microprocessor Controller displays all safety information on one screen with the touchpad.
- Ergonomic design encourages proper posture reducing fatigue.
- Stainless steel work surface ensures optimal clean less, chemical resistance and containment of accidental liquid spills.
- Energy efficient motor saves on your energy bills while increasing filter life lowering your total cost of ownership. Offers stable airflow, despite voltage fluctuations and filter loading with low noise at below 60 dbA.
- Each clean bench is individually factory tested for safety and performance in accordance with international standards.
- All components are cleanroom compatible.
- 10x filtration efficiency of HEPA filter creates Class 100 air quality work zone instead of industry-standard ISO Class 5.
- Washable, reusable pre-filter which trap dust and large particle.
- The removable protective screen located in front of the HEPA filter and easily removed for service and cleaning.
- Built-in recessed illuminator provides diffused lighting without interfering with the laminar flow.
- Kaizen Airtech Laminar Flow Clean Benches have been tested for cross-contamination and product protection using microbiological test.
- Face velocity is adjustable from less than 90 FPM (0.45 m/s) to higher than 130 FPM (0.66 m/s)
- Pressure drop from 0.35 to 0.795 inches W.G at 90 FPM (0.45 m/s)
- High product protection by a provision of ISO Class 5 particle free work area
- Latest EC energy efficient fans providing maximum performance with minimal energy use
Available Model:
Model No. | External Dimensions | Internal Dimensions | Airflow Velocity |
KALF-H3 | 1020X870X1950 mm (40.1” x 34.2” x 76.77”) | 857X 610 X572 mm (33.7” x 24.0” x 22.5”) | 460 CFM 781.54 M3/hr |
KALF-H4 | 1315X870X1950 mm (51.7” x 34.2” x 76.77”) | 1180X 610 X572 mm (46.4” x 24.0” x 22.5”) | 650 CFM 1104.36 M3/hr |
KALF-H6 | 1930X870X1950 mm (75.9” x 34.2” x 76.77”) | 1790X 610 X572 mm (70.4” x 24.0” x 22.5”) | 840 CFM 1427.17 M3/hr |
Vertical Laminar Flow Clean Benches
Product Brochure
Brand | Kaizen |
Type | Vertical |
Material | SS |
Surface Finish | Polished |
Air Flow | 270 CFM 458.7 M3/hr |
Usage/Application | Laboratory |
Model Name/Number | KALF-V2 |
Working Area | 2 x 2 x 2 feet |
External Dimensions | 705 x 870 x 1950 mm |
Internal Dimensions | 572 x 610 x 572 mm |
Key Benefits:
- Flexibility Design
- Humidity Control
- Adjustable Air Flow Velocity
- Temperature Control
- Low Vibration
Features:
- Microprocessor Controller displays all safety information on one screen with the touchpad.
- Ergonomic design encourages proper posture reducing fatigue.
- Stainless steel work surface ensures optimal clean less, chemical resistance and containment of accidental liquid spills.
- Energy efficient motor saves on your energy bills while increasing filter life lowering your total cost of ownership. Offers stable airflow, despite voltage fluctuations and filter loading with low noise at below 60 dbA.
- Each clean bench is individually factory tested for safety and performance in accordance with international standards.
- All components are cleanroom compatible.
- 10x filtration efficiency of HEPA filter creates Class 100 air quality work zone instead of industry-standard ISO Class 5.
- Washable, reusable pre-filter which trap dust and large particle.
- The removable protective screen located in front of the HEPA filter and easily removed for service and cleaning.
- Built-in recessed illuminator provides diffused lighting without interfering with the laminar flow.
- Kaizen Airtech Laminar Flow Clean Benches have been tested for cross-contamination and product protection using microbiological test.
- Face velocity is adjustable from less than 90 FPM (0.45 m/s) to higher than 130 FPM (0.66 m/s)
- Pressure drop from 0.35 to 0.795 inches W.G at 90 FPM (0.45 m/s)
- High product protection by a provision of ISO Class 5 particle free work area
- Latest EC energy efficient fans providing maximum performance with minimal energy use
Available Model:
Model No. | External Dimensions | Internal Dimensions | Airflow Velocity |
KALF-H3 | 1020X870X1950 mm (40.1” x 34.2” x 76.77”) | 857X 610 X572 mm (33.7” x 24.0” x 22.5”) | 460 CFM 781.54 M3/hr |
KALF-H4 | 1315X870X1950 mm (51.7” x 34.2” x 76.77”) | 1180X 610 X572 mm (46.4” x 24.0” x 22.5”) | 650 CFM 1104.36 M3/hr |
KALF-H6 | 1930X870X1950 mm (75.9” x 34.2” x 76.77”) | 1790X 610 X572 mm (70.4” x 24.0” x 22.5”) | 840 CFM 1427.17 M3/hr |
Vertical Laminar Airflow
Minimum Order Quantity: 5 Unit
Product Brochure
Brand | KAIZEN |
Type | Vertical |
Material | MS or SS |
Surface Finish | Powder Coated |
Usage/Application | Pharmaceutical Industry |
Color | ALL |
Voltage | 240 |
Air Cleanliness | Class 100 |
Vertical Laminar Flow Cabinets function equally well as horizontal Laminar Flow Cabinets with the laminar air directed vertically downwards onto the working area.
The air can leave the working area via holes in the base. Vertical flow cabinets can provide greater operator protection.
Sub type-
A. -Standard laminar air flow
B. -Modified laminar air flow
C. -Smart laminar air flow
A. -Standard laminar air flow-
Standard laminar air flow provides
Ø filtration,
Ø light fixture,
Ø worktable,
Ø Differential pressure gauge,
Ø caster wheels,
Ø 16A switch,
Ø UV light,
Ø Fluorescent light etc.
B. -Modified laminar air flow-
Modified laminar air flow provides
Ø filtration,
Ø light fixture,
Ø worktable,
Ø Differential pressure gauge,
Ø caster wheels,
Ø 16A switch,
Ø UV light,
Ø Fluorescent light
Ø Front door
Ø Operating control panel.
C. -Smart laminar air flow-
Smart laminar air flow provides
Ø filtration,
Ø light fixture,
Ø worktable,
Ø Differential pressure gauge,
Ø caster wheels,
Ø 16A switch,
Ø UV light,
Ø Fluorescent light
Ø Front door
Ø Operating touch panel
Ø HMI
Ø Flexible speed variation
Ø LED light etc.
Additional Information:
- Production Capacity: 100 per week
- Delivery Time: 15 day
Horizontal Laminar Workstation
Product Brochure
Brand | Kaizen |
Usage/Application | Laboratory |
Type | Horizontal |
Material | Stainless steel |
Surface Finish | Polished |
Voltage | 230V |
Velocity | 0.3-0.45 m/s |
Material Grade | SS 304 |
Diamension | 930 x 745 x 1620 mm |
HEPA filter efficiency | 99.99% at 0.3um |
Noise level | 65 dB |
Key Benefits:
- Class 100 Air quality maintains.
- Energy Efficient
- Superior airflow uniformity
- Ergonomic design
Features:
- Microprocessor Controller displays all safety information on one screen with a touchpad.
- Stainless steel work surface ensures optimal clean less, chemical resistance and containment of accidental liquid spills.
- Ergonomic design encourages proper posture reducing fatigue.
- Washable, reusable pre-filter which trap dust and large particle.
- 10x filtration efficiency of HEPA filter creates Class 100 air quality work zone instead of industry-standard ISO Class 5.
- The removable protective screen located in front of the HEPA filter and easily removed for service and cleaning.
- Each clean bench is individually factory tested for safety and performance in accordance with international standards.
- All components are cleanroom compatible.
- Kaizen Airtech Laminar Flow Clean Benches have been tested for cross-contamination and product protection using microbiological test method.
- Built-in recessed illuminator provides diffused lighting without interfering with the laminar flow.
- Face velocity is adjustable from less than 90 FPM (0.45 m/s) to higher than 130 FPM (0.66 m/s)
- Pressure drop from 0.35 to 0.795 inches W.G at 90 FPM (0.45 m/s)
Available Model:
Model No. | External Dimensions | Internal Dimensions | Airflow Velocity |
KALF-H3 | 1020X870X1440 mm (40.1” x 34.2” x 56.6”) | 3857X 610 X572 mm (33.7” x 24.0” x 22.5”) | 460 CFM 781.54 M3/S |
KALF-H4 | 1315X870X1440 mm (51.7” x 34.2” x 56.6”) | 1180X 610 X572 mm (46.4” x 24.0” x 22.5”) | 650 CFM 1104.36 M3/S |
KALF-H6 | 1930X870X1440 mm (75.9” x 34.2” x 56.6”) | 1790X 610 X572 mm (70.4” x 24.0” x 22.5”) | 840 CFM 1427.17 M3/S |
Clean Room
Material | PUF Panel |
Door Finishing | Polished |
Height | As per requirment |
Noise | Below 70db |
Color | RAL 9002 |
Panel Thickness | 50mm / 80mm |
Standard Class | As per requirment |
Partition Panels | PUF Panel |
Suitable For | Automobile industries,Pharma industries |
Maximum Temperature | As per requirment |
Modular Cleanrooms
Minimum Order Quantity: 100 Square Meter
Product Brochure
Door Finishing | Glossy |
Usage/Application | Pharmaceutical Industry,Electronics Industry,Food Processing,Automobile,Process Plant,etc.. |
Noise | 70 dB> |
Air Changes | 50 to 280 ACH ( ISO5 to ISO9) |
Brand | Kaizen |
Material | Powder Coated,Stainless Steel |
Panel Thickness | 50,60,80,100 mm for Sand witch Panel. 3,4,5,8,10 mm for transparent partition panel |
Country of Origin | Made in India |
Cleanroom Types
1. Hard wall Modular cleanrooms
2. Soft wall Modular cleanrooms
3. Biosafety cleanrooms
4. Insulated Cleanrooms
cleanroom classification
Additional Information:
- Production Capacity: as per requirement
- Delivery Time: one Month
Clean Room Equipment
Product Brochure
Brand | Kaizen |
Usage/Application | Industrial |
Material | Puff panels,ESD panels,MS,SS |
Air Flow | Customize |
Size | Customize |
Corrosion Resistance | Yes |
Height | Customize |